Carrara Quartz PB Slab

Before you order

Appearance: A warm sand-beige surface with a fine, even texture and no veining.

Quartz is manufactured, so slabs of one design look much the same; shade can still differ slightly between production batches. Ask us about the batch you will receive.

Quartz slab: Slabs typically fabricated into kitchen worktops, islands, vanity tops and wall panels for indoor use.

Slab size and thickness are confirmed with your quotation.

Technical properties

Features

• Low water absorptionWater absorption < 0.05% (ASTM C 97, EN 14617-1)
• Stain resistantStain resistance: pass (ANSI Z124.6)
• Acid resistantResistance to acids: not affected (ASTM C 650)
• Scratch resistantSurface hardness 6.0 – 7.0 on the Mohs scale (EN 101)
• Impact resistantImpact resistance 5 – 14.5 J (EN 14617-9)
• High modulus of ruptureModulus of rupture 55 – 65 MPa (ASTM C 99)
• Thermal shock resistantNo visual defects after 20 cycles (EN 14617-6)
• Frost resistantComplies with DIN 52104
• Easy to cleanWear and cleanability: pass (ANSI Z124.6)

Technical specifications — quartz range

As printed in the quartz catalogue; the values apply to the whole range.

Test	Standard	Result
Abrasion resistance	ASTM C 241	Min 25.0
	ASTM C 1243-93	Volume of chord: V = 60.0 – 107.9 mm³
	EN 14617-4	Chord length = 21.0 – 22.5 mm
Apparent density (kg/dm³)	ASTM C 97	> 2.1
	EN 14617-1	> 2.1
Boiling water resistance	NEMA LD3-3.5	Pass / no effect
Compressive strength (MPa)	ASTM C 170	150 – 250 (dry/wet)
	EN 14617-15	170 – 240
Cigarette test	ANSI Z124.6	Pass
Chemical resistance	ANSI Z124.6	Pass
	EN 14617-10	Class C4
Dimensional stability	EN 14617-12	Class A
Freeze and thaw resistance	ASTM C 1026	No damage after 20 freeze–thaw cycles
	EN 14617-5	No defect after 25 freeze–thaw cycles
Flexural strength (MPa)	ASTM C 880	40 – 60 (dry/wet)
	EN 14617-2	50 – 60
Frost resistance	DIN 52104	Complies with standard
Fire classification	EN 13501-1	Wall cladding: B-S1-d0; flooring and stairs: B-fl-S1
Glossiness reflection (%)	—	55 – 70
High temperature resistance	NEMA LD3-3.6	Pass / no effect
Impact resistance (joule)	EN 14617-9	5 – 14.5 J
Linear thermal expansion (30 °C – 100 °C)	ASTM C 372-94	3.0 – 5.0 × 10⁻⁵ per °C
	EN 14617-11	13 – 26.0 × 10⁻⁶
Modulus of rupture (MPa, dry/wet)	ASTM C 99	55 – 65
Radiation	GB 6566-2010	Complies with requirement of standards
Resistance to acids	ASTM C 650	Not affected
Surface hardness (Mohs scale)	EN 101	6.0 – 7.0
Surface burning	ASTM E 84	Class A
Slip resistance	EN 14231	Wet: 13 – 21 SRV; dry: 43 – 53 SRV
Stain resistance	ANSI Z124.6	Pass
Surface slip resistance, honed 400	DIN 51130	R9
Static coefficient of friction	ASTM C 1028	Dry: 0.8; wet: 0.6
Thermal shock resistance	EN 14617-6	No visual defects after 20 cycles; loss in mass 0.04% – 0.07%; loss in flexural strength 6.0% – 9.5%
Thermal conductivity	EN 12664	0.435 – 0.485 W/(m·K)
Wear and cleanability	ANSI Z124.6	Pass
Water absorption (%)	ASTM C 97	< 0.05
	EN 14617-1	< 0.05

Cutting and grinding quartz releases fine crystalline silica dust, which is harmful to breathe; fabrication should use wet cutting, dust extraction and proper respiratory protection.

Care

Clean quartz with a mild detergent and a soft cloth, and avoid harsh, high-pH or abrasive cleaners. Quartz contains resin, so use a trivet under very hot pans.

Collection and delivery

Collection from our Sajja yard or delivery is confirmed in the quotation for each order. See delivery and collection.